SANDY CREEK

Sandy Creek is s 925-megawatt coal-fired plant located near Riesel, Texas. Emmert International performed the successful site transportation, lifting and rough setting of a Toshiba Steam Generator Stator at the power plant.

The Stator was 35’-0½” (10680mm) L x 21’-2 5/16” (6460mm) W x 17’-8 5/8” (5400mm) H with a gross transport weight of 886,250 lbs (402 tons).

The Stator was transferred from rail to Emmert International’s hydraulic platform trailer by using a 700 ton gantry. After it was trans-loaded the generator was transported to the site lifting area.

The Stator was lifted into position approximately 60’ vertically and moved over the Operating floor approximately 120’, with a 60’ free span, into the set down position over the foundation block.

The Stator was then lowered under guidance from the site into the required position on the foundation block.

WANT TO LEARN MORE ABOUT OUR TRANSPORTATION AND LOGISTICS CAPABILITIES?

Contact us today

EMAIL

800.936.6378

Toll Free